phys_chem_parameter: Physio-Chemical Parameter Data for each Non-sewered Sanitation Containment
Source:R/phys_chem_parameter.R
phys_chem_parameter.RdThis data set contains the measured in situ and analyzed in laboratory physical, chemical and biological parameters pertaining to each containment sampled as well as at different vertical locations in each containment (i.e., Top of containment, middle and bottom).
Format
A tibble with 119 rows and 29 variables
- sample_id
unique identifier for each sampling location in the format ##-Location-ddmmyyyy
- location_id
unique location identifier for each sampling day in the format of (#)-day of sampling (a) - location in that day
- date
date of sampling
- depth_id
unique identifier for each sample indicating the location in the containment (T = top, M = middle, B = bottom)
- sludge_depth
depth in meters, of where from the top of the sludge the sample was taken
- temperature
Temperature of the sludge at the insitu sampling location (in degrees Celsius)
- DO
dissolved oxygen concentration in mg/L at the insitu sampling location
- pH
pH value at the insitu sampling location
- ORP
oxidation reduction potential, measured in millivolts, at the insitu sampling locations
- EC
electrical conductivity, measured in microSiemens, at the insitu sampling locations
- COD
Chemical oxygen demand, mg/L
- soluble_COD
Soluble chemical oxygen demand, mg/L
- sulphide
Sulphide, mg/L
- total_nitrogen
Total Nitrogen, mg/L
- nitrite
Nitrite, mg/L
- nitrate
Nitrate, mg/L
- ammonia
Ammonia, mg/L
- TKN
Total Kjeldahl Nitrogen, mg/L
- ortho_phosphorous
Ortho Phosphorous, mg/L
- total_phosphorous
Total Phosphorous, mg/L
- BOD
Biochemical oxygen demand, mg/L
- TOC
Total organic carbon, mg/L
- ts
Total solids, g/L
- vs
Volatile Solids, g/L
- vs_percent
Volatile Solids, % total solids
- sand_content
Sand content, g/L
- tss
Total suspended solids, g/L
- vss
Volatile suspended solids, g/L
- vss_tss
VSS/TSS (ratio)